Arbsession Canopy Anchor

• Designed as a canopy anchor device for remote or manual installation in the canopy of a tree to provide an approved anchor.
• It engineers out hazard exposure by reducing components and complexity to a climber’s system, also adding better rescue readiness and reducing the potentials for failure.
• Fast use on spar pole work as a choking false crotch, and it can retrieve very easily meaning no “spiking down”.
• Acts as a floating anchor, meaning performs the same way a base tie would when retrieving after climber redirects.
• Versatile, because if the tie-in is difficult to isolate the climber advances the system by simply unclipping and re-clipping their carabiner.
• Can aid in rescue by preinstalling a second climbing line on the retrieval side; only if the victim is weighted in the working end, then a rescuer would be able to simply use the preinstalled line to access the tree.
• Easy to understand concept, identifiable components, and very trainable to new climbers regarding use and how to rescue climbers using it.
• Note: ensure the carabiner is oriented with the spine of the carabiner parallel to the climbing line so it will be loaded along its major axis 
• For personal use only. NOT for towing or hoisting.

Length:  9.5 inches

Large Ring Interior Diameter:  40mm

Small Ring Interior Diameter:  28mm

Ring Material:  Aluminum

Ring Rating:  30kN

**Must be used in conjunction with ANSI Z359.12 rated triple action carabiner.