Climbing Technology Cric Multifunctional Rope Clamp

 

• Versatile, compact size and ease of use allow reducing to the minimum time, material and space needed in rope manoeuvres
• it allows ascending the rope in accordance with EN 567 / EN 12841-B standards (ascender mode)
• it can be used as a simple pulley for lifting or transferring a load in accordance with the EN 12278 standard (pulley mode)
• Integrated ball-bearing sheave can be used as a simple redirect to make it easier to ascend a rope or to lift a person without the aid of additional connectors (rope clamp/pulley mode)
• Allows the direct lifting of a load, the creation of hauling systems and the rescue or self-rescue of a person (progress-capture hauling pulley mode)
• When used in pulley mode, the rope is free to run in both directions; instead, when the hauling-pulley mode is used, the rope can only run in one direction and it is locked in the opposite one
• When used in progress-capture hauling pulley mode, it is possible to lower the lifted load by acting on the dedicated cord connected to the cam within the device
• Easy opening, via an intuitive release button, makes the installation of the device on the rope swift – no matter the mode that is going to be used in – even with gloves on or in difficult conditions
• Equipped with a steel cam featuring teeth that minimize rope wear but are effective in blocking the rope.
• Cam is designed with two slots to reduce the build-up of dirt, so maintaining the lock on the rope very efficient in any condition (muddy, frozen rope, etc.).
• Weight: 150g (5.29 oz)
• Caution! This equipment is not a fall arrester (EN 353-2 / EN 12841-A) nor can it be used for self-belaying while climbing.

Weight:  150 grams (5.29 oz)

Rope Capacity:  8mm to 12mm (5/16 inch to 1/2 inch)

Standards:  EN 567:2013 (ropes 8mm to 12 mm),  EN 12841:2006-B (ropes 10mm to 12mm), EN 12278:2007 (ropes ≤ 11 mm)