Clogger Ember UL Rated Chainsaw Pants for Winter
SPECIAL ORDER ~2 Weeks
Clogger Ember chainsaw pants are designed for freezing temperatures and beyond, excelling in extreme cold while remaining versatile in milder conditions up to 50°F/10°C.
Constructed with multiple layers for unique functionality: a 4-way stretch high-tenacity ripstop nylon exterior with PFC-Free DWR water resistance, a windproof and moisture-wicking TPU membrane, and a warm fleece-lined inner layer.
For "Custom Garment Sizes" select the closest size and click the "Custom Garment Size" button below. We will contact you to get the specifics.
Chainsaw protection
- Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection.
- Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance.
- Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes.
Outer construction and design
- The Ember shell is constructed of 3 layers including a high-tenacity, ripstop nylon exterior layer
- PFC-Free DWR water resistant coating, a middle windproof moisture wicking TPU membrane and warm fleece lined inner.
- Get maximum movement with the 4-way stretch outer and FlexZone in the seat seam for extra give.
- Designed to last with high wear areas protected using abrasion resistant fabric over the lower leg.
- Stay dry and warm with built in water resistant gaiters to keep cold air, snow and slush out.
- Elasticized waist for a snug fit and extra comfort.
- Lock stitched seams and reinforced stress points.
Tree people specific detail
- Have full temperature and moisture control with two welted lower thigh vents that seal wind out when zipped closed.
- Get easy access to everything that you need with four highly functional secure zipped side pockets (two accessible in the harness)
- All pockets can be pulled out to empty saw dust and have easy grip zipper pulls for use with gloves.
- A high back for better protection from the cold and comfort in the harness.
- Keep the bottom of your pants from riding up without snagging using Clogger’s unique boot hook system.
- Opening at hems to remove debris.
- Midweight design, just 3 lbs (Medium).
- Protection: Front only or 360 calf wrap for additional protection.
- Designed and made in Invercargill, New Zealand
Men
Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing.
Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist.
| Mens | |||||
| Size | Waist (in) | Approx Jeans Equivalent Waist Size (In) | Standard Inleg (in) | Short Inleg lengh (In) | Tal Inleg Length (in) |
| 2XS | 28-30 | 27 | 30 | 27.5 | 32 |
| XS | 30.5-32.5 | 30 | 31 | 28 | 33 |
| S | 33-35 | 32 | 31 | 29 | 33.5 |
| M | 35.5-37.5 | 35 | 32 | 29 | 34 |
| L | 38-40 | 37 | 32 | 30 | 34.5 |
| XL | 40-42 | 39 | 32.5 | 30 | 35 |
| 2XL | 43-45 | 42 | 32.5 | 30 | 35 |
| 3XL | 45-47 | 44 | 32.5 | 30 | 35 |
Women
Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing.
Note 2: If working from actual body measurements, firstly determine the hip/seat size.
Note 3: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist.
| Womens | ||||||
| Size | Waist (in) | Hip/Seat (In) | Aprox Size (W - US) | Standard Inleg (in) | Short Inleg lengh (In) | Tal Inleg Length (in) |
| 2XS | 31-33 | 35 | 4 | 28 | 26 | 31 |
| XS | 33-35 | 37 | 6 | 29 | 26.5 | 31 |
| S | 35-37 | 39 | 8 | 29 | 27 | 31.5 |
| M | 37-39 | 41 | 10 | 29.5 | 27 | 32 |
| L | 39-41 | 43 | 12 | 30 | 27.5 | 32 |
| XL | 41-43 | 45 | 14 | 30 | 28 | 33 |
| 2XL | 43-45 | 47 | 16 | 30 | 29 | 33 |
