DMM Nomad 11.8mm Blueberry Blue Lanyard System

• Two bright rope colours with hitch cords and colour coded hardware for easy identification in complex environments; enhancing safety by helping avoid any confusion with main line or a second lanyard.
• A range of lanyard lengths (3m, 4m, 5m, 7m, 10m, 15m and 20m) to suit the working environment and your climbing style.
• Choice of two rope diameters to suit the weather, season and size of hands. Thicker rope is easier to hold in the cold and wet and also has greater cut resistance. Lower diameter for weight saving and use in the warm and dry.
• Market proven 24 strand count polyester cover double braid rope with a nylon core. Easy to grip and good abrasion resistance.
• The Fidus hitch cords have a polyester core and sheath, offering exceptional and consistent performance over an extended lifespan, even in harsh high UV environments.
• The hitch cordage has been designed to interact smoothly, consistently and reliably in a wide range of conditions.
• DMM TAP 2 to advance the friction hitch early and minimal sit-back. Three holes allow for additional configurations in complex work positioning.
• Paired with DMM Ultra O for correct compatibility between pulley, friction hitch and connection to the harness.
• Short and strong stitch patterns in sewn eye terminations.
• All Nomad lanyard systems are certified to EN358:2018, EN795B:2012. Not to be used for fall arrest.
• All Nomad Lanyard systems are certified as an anchor assembly for two-person rescue loads (PD CEN/TS 16415:2013).

Certified in a wide range of configurations:

• Doubled, with two points of attachment on harness - Side D to Side D (excluding suspension)/Forward D to Forward D (including suspension).
• Doubled, with one point of attachment on harness (e.g. bridge/ventral attachment) and the termination connector attached to TAP 2.
• Restraint when connected to a harness/belt attachment point(s) approved for restraint.
• Single, using thimble hitch. Significantly increases the working length of the lanyard and reduces clutter close to the harness.
• Attach further fall protection systems for more work positioning options using additional holes in TAP 2.
• Two doubled configurations using a single lanyard for two points of connection to the structure.
• End to end lanyard connection using full length.
• Rescue, using the lanyard as an anchor assembly.
• Certified with three friction hitches (Distel 5+1, Schwabisch 5+1, VT 5+2) tied using the same length Fidus 8.5mm eye to eye.

Product Name: Nomad 11.8mm

Colour: Blue

Max. One Person Load To EN358*: 150kg

Max. Two Person Load To EN795**: 300kg

Certification:

• EN358:2018, EN795:2012 Type B, PD CEN/TS 16415:2013 Type B (2 users)

Length:

• 3m - 9 ft 10.1 inches
• 4m - 13 ft 1.5 inches
• 5m - 16 ft 4.9 inches
• 7m - 22 ft 11.6 inches
• 10m - 32 ft 9.7 inches
• 15m - 49 ft 2.6 inches
• 20m - 65 ft 7.4 inches

Weight:

• 3m - 575g (1 lbs 4.3 oz)
• 4m - 654g (1 lbs 7.1 oz)
• 5m - 743g (1 lbs 10.2 oz)
• 7m - 914g (2 lbs 0.2oz)
• 10m - 1172g (2 lbs 9.3 oz)
• 15m - 1597g (3 lbs 8.3 oz)
• 20m - 2022g (4 lbs 7.3 oz)

*One person use including tools, gear and all other equipment.

** The product can be used as an EN795 anchor in a rescue scenario permitting two person use and a maximum load of 300kg. For more information on this configuration and safe use please see product instructions.