ISC Rocker
The ISC Rocker is a mid-line attachable device, which can be used hands-free as a self-tailing device when traveling up or down the rope. The Rocker is also fitted with a thumbcatch which can be engaged in order to park the device on the rope. While in parked mode, the user can still move the device up and down on the rope, but in parked mode, the device will not slide down the rope without intervention from the user.
The Rocker is designed for use WITHOUT (and should be used without) a textile shock absorber. ALWAYS read the User Instruction Manual prior to use.
- This versatile device can be used as a backup, in rescue scenarios and much more
- Certified for 10.5mm to 11mm rope (it has been tested up to 12.7mm)
Rope diameter range: 10.5mm to 11mm EN1891 Type A (see 'Notes' section below, regarding the use of 12.7mm rope)
Safe Working Load: Varies depending on intended use/EN standard
Cam material: Aluminum
Finish: Anodized
Approved Standards: CE EN353-2:2002; EN358:2018; EN12841:2006-A and UKCA 0120
IMPORTANT: The lanyard length, harness connection and general instructions for use, vary depending on intended use/EN standard. It is essential for the user to read the User Instruction Manual for further information, in order to identify the correct equipment and procedures for correct use of the device.
Notes: EN12841:2006-A Rope access systems- Rope adjustment devices. For use with 10.5mm to 11mm diameter EN1891 Type A rope. Max user weight 150kg (including tools, equipment, etc). *See additional note for rescue*. Additional testing was conducted using 12.7mm (1/2”) diameter Sterling HTP Static rope (non-EN1891). Max user weight 150kg (including tools, equipment etc.). The lanyard must not exceed a length of 35cm (including connectors). Please read the RP500 User Instruction Manual, in full.
