Makita 40V max XGT Telescoping Pole Saw Kit
10" Telescoping Pole Saw Kit, 13' Length, 2 Batteries, 1 Charger
POWER : Makita-built brushless motor delivers the power of a 35cc gas pole saw
DESIGN : Telescoping shaft adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches
SPEED : Up to 30% faster than gas
RUN TIME : Up to 185 cuts in 4x4 cedar with 40V XGT® 5.0Ah battery
INCLUDES : (2) 40V max XGT® Lithium-Ion 5.0Ah batteries, rapid charger, 10" guide bar, 10" saw chain, file with file guide, and harness
The 40V max XGT® Brushless 10" Telescoping Pole Saw (GAU02) easily adjusts from 9-ft. to 13-ft. in length to allow the user to reach higher and trim branches with ease. The Makita-built brushless motor delivers the power of a 35cc gas pole saw. The Pole Saw delivers up to 185 cuts in 4x4 cedar on a single charge of an XGT® 5.0Ah battery, allowing the user to cut and trim for longer periods of time.
Order this Pole Saw Kit and get a FREE 40V Max XGT Blower!
The Pole Saw has convenience features that include a lateral chain tensioner with a single stud for efficient chain retention and a captured bar nut that is retained in the sprocket cover for easier setup and maintenance. There is also a translucent bar oil tank with a large opening that aids in adding oil and keeping the bar properly lubricated. Additional features include Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of the attachment is suddenly forced to stop.
Durability features include Extreme Protection Technology (XPT™) for improved dust and water resistance, and IPX4 weather-resistant construction.
XGT® is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Features
- OUTPOWER: Makita-built brushless motor delivers the power of a 35cc gas pole saw
- OUTSMART: Up to 30% faster than gas*
- OUTLAST: Up to 185 cuts in 4x4 cedar with 40V XGT® 5.0Ah battery
- Telescoping shaft easily adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches
- Lateral chain tensioning with single stud for efficient chain retention
- Captured bar nut is retained in sprocket cover for convenient setup and maintenance
- Branch hook for pulling trimmed branches from trees
- Translucent bar oil tank with large opening for easier refilling
- Includes 10" sprocket nose guide bar and 3/8" low profile pitch, .050" gauge chain
- IPX4 weather-resistant construction for durability and long life
- Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of the attachment is suddenly forced to stop
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- 3-year limited warranty on tool, battery and charger
- Only use genuine Makita batteries and chargers
*Compared to 36.3cc gas pole saw cutting speed
Specs
- Power Equivalency (cc Gas) : 35
- Product Type (CS, PS) : Telescoping 9'-13'
- Guide Bar Length : 10"
- Pitch : 3/8" LP
- Gauge : .050"
- Chain Speed : 3,940 FPM
- Overall Length (ft.) : 9.1' - 13.1'
- Net Weight (with battery) : 18.3 lbs.
- Net Weight (without battery) : 15.4 lbs.
- Battery : 40V max XGT® Lithium-Ion
- Motor Type : Brushless
- Power Type : Cordless
- Packaged Depth (in) : 11.02"
- Packaged Height (in) : 9.25"
- Packaged Width (in) : 88.19"
- Shipping Weight : 36.06 lbs.
Includes
- (1) 40V max XGT® Brushless 10" Telescoping Pole Saw, 13' Length (GAU02Z)
- (2) 40V max XGT® 5.0Ah Battery (BL4050F)
- (1) 40V max XGT® Rapid Optimum Charger (DC40RA)
- (1) 10" Saw Chain, 3/8" LP, .050", 40, Low Kickback (E-12740)
- (1) 10" Guide Bar, 3/8" LP, .050" (E-12734)
- (1) Chain Saw File and Guide (198457-8)
- (1) Pole Saw Harness, XAU02 (191K37-5)
- (1) 10" Chain Cover
