Arbsession caraLINK Blue Rope Wrench Tether v2
The Arbsession caraLINK v2 Tether was developed with the goal of providing a compact, solid tether but incorporating a way to quickly connect it into the climbing system, without the bulk of tape at the top of the carabiner.
Sewn by the Arbsession Splicing Team.
Our kits are built with the DMM Perfect O for the 8.5" tether and the DMM Ultra O for the 12" tether. Other carabiners can also work with the caraLINK v2!
Details
With one leg of the tether extending down then outside the spine of the carabiner you reduce the leverage effect at the top of the carabiner. Now this tether isn't designed to be super stiff. It is sewn with the tightest of tolerances. Now with the NEW caraLINK v2, once the tether is installed on the carabiner the gate can now fully open. This allows you to install it on the top of the DMM Triple Attachment Pulley or DMM Hitch Climber Eccentric with ease.
When you use a traditional stiff tether you end up having the legs of the hitch cord, stiff tether and slack tending pulley all squished at the top of the carabiner. Not with this system!
- made out of Edelrid Powerloc Expert SP 6mm
- takes the bulk away from the hitch cord attachment carabiner (legs of hitch cord and stiff tether aren't squished together)
- the single leg of the tether runs around and along the outside of the spine to reduce leverage at the top of the carabiner
- streamlined system
- 8.5" or 12" total length with carabiner.
More Information
Ask An Expert
Have a Question?
Our tree care experts are here to help. Contact us for personalized advice and recommendations.
Phone: 920.347.4450
Email: info@arbsession.com
Greatest Tether of All Time
No body had made a better tether, at this point your slacking if you don’t own one of these yet. This allows you to switch from DRT to SRT instantly with a hitch climber setup. My hitch climber pulley is the only tool more well used than this tether with my wrench.
CaraLink2 Is awesome!
Compact and excellent. Really, if you work with a rope wrench give this tether a try. I use the short 28” cord with the Arbsession hitch. Works very well on ropes from 11-12.5mm. I’m 185 lbs before gear, and I like my gear. I recommend!