Auger Bits for Tree Support Systems
Made in the USA, these fast and productive Eliminator augers have wide flutes for fast chip removal and a screw-tip to assist the user in boring fast, clean holes.
They work best when used with a 1/2" gas-powered auger drill or the Makita 36V LXT® Brushless 1/2" Right Angle Drill.
All bits are equipped with a 7/16in Hex Shank!
Details
The patented Eliminator comes equipped with a standard general purpose lead screw, a carbide cutter, a hardened steel cutting spur, and a single hollow flute body milled from a single piece of alloy steel for strength. This combination allow the Eliminator to bore holes in all types of wood quickly and easily while leaving little or no residue producing a clean smooth hole. The Eliminator is self feeding and requires less torque. It can be used with electric or gasoline powered drill motors and can be resharpened.
Choose the correct bit size for your application:
7/16" x 12" Bit (5" flute length) for use with 1/2" Lags
9/16" x 8" Bit (5" flute length) for use with 5/8" Lags
9/16" x 18" Bit (15" flute length) for use with 5/8" Lags, 1/2" Eye Bolts, 1/2" Rod
9/16" x 24" Bit (21" flute length) for use with 5/8" Lags, 1/2" Eye Bolts, 1/2" Rod
9/16" x 48" Bit (45" flute length) for use with 1/2" Rod
11/16" x 18" Bit (15" flute length) for use with 5/8" Eye Bolts, 5/8" Rod
11/16" x 24" Bit (21" flute length) for use with 5/8" Eye Bolts, 5/8" Rod
11/16" x 48" Bit (45" flute length) for use with 5/8" Rod
11/16" x 60" Bit (57" flute length) for use with 5/8" Rod
11/16 x 72" Bit (69" flute length) for use with 5/8" Rod
13/16" x 24" Bit (21" flute length) for use with 3/4" Rod
13/16" x 48" Bit (45" flute length) for use with 3/4" Rod
13/16" x 60" Bit (57" flute length) for use with 3/4" Rod
13/16" x 72" Bit (69" flute length) for use with 3/4" Rod
15/16" x 30" Bit (27" flute length) for use with 7/8" Rod
1" x 48" Bit (45" flute length) for use with 7/8" Rod
Ask An Expert
Customer Questions
The 24 inch bit has an overall length of 24 inches and a usable length of 21 inches.
Hoggs out holes
These auger bits do a good job. I use the 11/16" x 24" to start the hole and switch to the 48" for making holes in order to install 5/8” threaded rod for bracing.