Yale XTC-24 Blaze Climbing Rope
Innovative light weight arborist climbing line-11mm
Important: The cover on most new double braid ropes will stretch during the first few weeks of use. The excess cover should be cut off. For this reason we don't recommend putting two eyes on a brand new double braid rope.
Innovative light weight arborist climbing line-11mm
- Competition grade
- Smoothest cover for mechanical ascension
- Lowest elongation results in minimal bounce
- Smaller diameters are also favorable for recreational climbers
innovative lightweight – a unique 11mm, spliceable, double-braided rope construction boasting a smooth 24-strand braided cover of high-tenacity solution-dyed yarns with ultimate visibility and runs well in mechanical devices. Blaze and Bandit meet CE0120 EN1891 Type-B.
Diameter (mm) | Average Break Strength *(Lbs) | Suggested Design Factor 10:1 **(Lbs) | Weight (Lbs/100f) |
---|---|---|---|
11 | 5,600 | 560 | 6.0 |
* Average break strength is based on spliced rope or capstans samples. Knots and abrupt bends significantly reduce the strength of all ropes and lower the design factor.
** Suggested design factor is based on static or moderately dynamic lifting/pulling operations. Instantaneous changes in load, up or down, in excess of 10% of the rope’s suggested design factor constitute hazardous shock load and would void the suggested design factor recommendation. The end user is responsible for choosing the correct design factor specific to their application.